Parts request list
022620
Throttle and air cable, middle adjuster, outer length 935mm, inner length 1020mm, for Amal 76, 276 and Monobloc 376 carburettor
Price (VAT exc) : 17,30 €
023696
Air control cable, for 376 Amal Monobloc carburettors, outer length 83.5cm, outer length 95.5cm, BSA, AJS, Matchless, Ariel
Price (VAT exc) : 14,90 €
07 274275
Gasket set, 74, 274, 75, 275 Amal pre monobloc carburettor
Price (VAT exc) : 9,75 €
07 29276
Gasket set, Amal 76, 276 carburettor
Price (VAT exc) : 5,95 €
07 306013
Twist grip, grip length 95mm, Amal, NOS
Price (VAT exc) : 29,50 €
07 363
Gasket set, Amal Monobloc 363 carburettors
Price (VAT exc) : 12,40 €
07 375
Gasket set, Amal Monobloc 375 carburettors
Made in England
Price (VAT exc) : 5,70 €
07 376
Gasket set, Amal Monobloc 376 carburettors
Made in England
Price (VAT exc) : 5,70 €
07 389
Gasket set, Amal 389 Monobloc series
Price (VAT exc) : 5,70 €
07 605240
Throttle slide, no. 4, Amal 276 carburettor
Price (VAT exc) : 109,00 €
07 A900
Carburettor adaptor sleeve to air filter, alloy, Amal Concentric 900 series, 928, 930,932
Price (VAT exc) : 27,85 €
07 A900U
Carburettor adaptor sleeve to air filter, Amal Concentric 900 series, 928, 930,932
(used - For further information or photos contact us)
Price (VAT exc) : 12,00 €
07 RKC515
Tickler kit, pin, body and spring, Amal Monobloc 375, 376, 389
Price (VAT exc) : 8,65 €
12/606
Choke control lever cap, air control lever cap
Made in England
Price (VAT exc) : 3,20 €
124/026-15
Pilot jet, 15 for Amal Concentric MKI, MKII 600, 900 series carburettors
Price (VAT exc) : 5,70 €
124/026-20
Pilot jet, 20 for Amal Concentric MKI, MKII 600, 900 series carburettors
Price (VAT exc) : 5,70 €
124/026-25
Pilot jet, 25 for Amal Concentric MKI, MKII 600, 900 series carburettors
Price (VAT exc) : 5,90 €
124/026-30
Pilot jet, 25 for Amal Concentric MKI, MKII 600, 900 series carburettors
Price (VAT exc) : 5,70 €
124/026-35
Pilot jet, 35 for Amal Concentric MKI, MKII 600, 900 series carburettors
Price (VAT exc) : 5,70 €
124/026-40
Pilot jet, 40 for Amal Concentric MKI, MKII 600, 900 series carburettors
Price (VAT exc) : 5,70 €
124/026-45
Pilot jet, 45 for Amal Concentric MKI, MKII 600, 900 series carburettors
Price (VAT exc) : 5,70 €
13/129
Pilot air adjusting screw, Amal 4, 74, 274, 5, 75, 275, 6, 76, 276 carburettors
Price (VAT exc) : 7,80 €
13/163
Banjo bolt washer for Amal Concentric carburettor
Price (VAT exc) : 2,20 €
14/024
Float needle, bottom feed, for Amal pre monobloc carburettors, 4, 74, 274, 5, 75, 275, 6, 76, 276, 89, 289 for both plastic and copper float
Price (VAT exc) : 22,90 €
14/209
Tickler pin, Amal pre monobloc carburettor
Price (VAT exc) : 5,04 €
14/419
Banjo 180 degrees for pre-monobloc Amal 74, 75, 76, 274, 275, 276 carburettors, to suit 1/4" fuel pipe
Price (VAT exc) : 28,00 €
16/010
Lock nut for throttle stop screw, 1BA, Amal Pre Monobloc carburettors, 274, 275, 276, 289
Price (VAT exc) : 5,15 €
16/011
Slotted cable stop abutment, large, throttle, for standard Doherty and Amal type twistgrip
Price (VAT exc) : 3,80 €
16/417
Twist grip, rep. Amal type 16, for 7/8" hadlebars, single cable, as fitted to numerous classic motorcycles from the late 1940's
Price (VAT exc) : 39,50 €
18977
Brake lever combined with air lever, assembly, Amal type, 7/8", premium quality
Price (VAT exc) : 65,55 €
18979
Clutch lever combined with magneto lever, Amal type, 7/8", premium quality
Price (VAT exc) : 65,55 €
244/104
Junction box, twin carburettors, for air or throttle cables, Amal
Price (VAT exc) : 9,50 €
244/1048
O ring, mounting flange, Amal Monobloc 376, 389, 689 carburettors
Price (VAT exc) : 2,45 €
244/2080
Cable junction box, 3 way, for air or throttle cables, Amal, BSA A75 Rocket 3, Triumph T150, T160 Trident
Price (VAT exc) : 10,40 €
2622/063
Throttle needle 2B1, 2 strokes, Amal Concentric MK2 2600 series
Price (VAT exc) : 14,90 €
2622/144
Gasket set, Concentric MK2 Amal carburettors 2000 series
Made in England
Price (VAT exc) : 5,75 €
2622/145
Air vent tube, Amal Concentric MKII carburettors
Price (VAT exc) : 3,10 €
29/057
Air valve guide, Amal Monobloc 389 and pre-monobloc 89, 289 carburettors
Price (VAT exc) : 7,95 €
29/075
Needle, slide, Amal carburettor 9, 89, 289
Price (VAT exc) : 33,30 €
2928/0603
Throttle slide, no. 3, Amal Concentric MK2 carburettor 2900 series
Price (VAT exc) : 39,90 €
2928/123
Adaptor, rubber, hose, 2900 Amal carburettors, compatible for 28mm to 34mm carb, Triumph T140
Price (VAT exc) : 9,50 €
2930/116
This alloy manifold enables the fitting of an Amal Mk2 concentric carburettor to machines using the Mk1 series as original equipment, 30mm bore
Price (VAT exc) : 33,90 €
316/007
Throttle needle for Amal GP carburettors, 10GP, 15GP, 10GP2, 15GP2
Price (VAT exc) : 37,50 €
316/010/3
Throttle slide, no. 3, Amal GP Series, T10GP, T10GP2
Price (VAT exc) : 110,00 €
316/010/4
Throttle slide, no. 4, Amal GP Series, T10GP, T10GP2
Price (VAT exc) : 110,00 €
316/065-106
Needle jet 106 for Amal GP carburettors
Price (VAT exc) : 13,80 €
316/065-107
Needle jet 107 for Amal GP carburettors
Price (VAT exc) : 13,80 €
316/065-108
Needle jet 108 for Amal GP carburettors
Price (VAT exc) : 13,80 €
316/065-109
Needle jet 109 for Amal GP carburettors
Price (VAT exc) : 13,80 €
316/065-110
Needle jet 110 for Amal GP carburettors
Price (VAT exc) : 13,80 €
316/065-115
Needle jet 115 for Amal GP carburettors
Price (VAT exc) : 13,80 €
316/065-120
Needle jet 120 for Amal GP carburettors
Price (VAT exc) : 13,80 €
316/065-125
Needle jet 125 for Amal GP carburettors
Price (VAT exc) : 13,80 €
363/044-100
Main jet, 100, Amal Monobloc 363
Price (VAT exc) : 19,95 €
363/044-130
Main jet, 130, Amal Monobloc 363
Price (VAT exc) : 19,95 €
363/044-55
Main jet, 55, Amal Monobloc 363
Price (VAT exc) : 19,95 €
363/044-65
Main jet, 65, Amal Monobloc 363
Price (VAT exc) : 19,95 €
375/0604
Throttle slide, no. 4, Amal Monobloc 375
Price (VAT exc) : 79,50 €
375/064
Cap, mixing chamber top, Amal 375 Monobloc carburettor, to fit two adjusters
Price (VAT exc) : 40,90 €
376/060/35
Throttle slide, no. 3,5 for Amal Monobloc 376 series carburettor
Price (VAT exc) : 49,00 €
376/061
Throttle slide spring, Amal Monobloc 376 series carburettor
Price (VAT exc) : 2,45 €
376/069
Throttle screw spring, Amal Monobloc carburettor
Price (VAT exc) : 2,40 €
376/072-105W
Needle jet, 105, Amal Monobloc series
Price (VAT exc) : 6,90 €
376/072-106W
Needle jet, 106, Amal Monobloc series
Price (VAT exc) : 6,90 €
376/072-107W
Needle jet, 107, Amal Monobloc series
Price (VAT exc) : 6,90 €
376/072-108W
Needle jet, 108, Amal Monobloc series
Price (VAT exc) : 6,90 €
376/073
Main jet holder, Amal Monobloc 375, 376, 389 carburettors
Price (VAT exc) : 13,90 €
376/074
Washer for jet holder, Amal Monobloc carburettor 375, 376, 389, 689 series
Price (VAT exc) : 2,60 €
376/076/25
Pilot jet, 25, Amal Monobloc series
Price (VAT exc) : 12,90 €
376/079
Screw, float chamber cover, Amal Monobloc carburettors
Price (VAT exc) : 1,45 €
376/093
Nylon filter gauze for Amal Concentric and Monobloc 376, 389 carburettors
Price (VAT exc) : 4,50 €
376/094
Float spindle bush, Amal Monobloc carburetors 375, 376, 389
Price (VAT exc) : 3,20 €
376/097
Banjo, single, 1/4'' (6mm) inside diameter hose, for Amal Concentric 6 & 9 series and Amal Monobloc 376, 389
Price (VAT exc) : 8,60 €
376/100/100
Main jet, 100, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 9,00 €
376/100/110
Main jet, 110, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 9,00 €
376/100/120
Main jet, 120, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 9,00 €
376/100/130
Main jet, 100, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 9,00 €
376/100/140
Des EN: Main jet, 140, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 8,36 €
376/100/150
Main jet, 150, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 8,35 €
376/100/160
Main jet, 160, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 8,36 €
376/100/170
Main jet, 170, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 8,35 €
376/100/180
Main jet, 180, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 8,10 €
376/100/190
Main jet, 190, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 8,10 €
376/100/200
Main jet, 200, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 8,20 €
376/100/210
Main jet, 210, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 8,50 €
376/100/220
Main jet, 220, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 8,20 €
376/100/230
Main jet, 230, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 8,20 €
376/100/240
Main jet, 240, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 8,20 €
376/100/250
Main jet, 250, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 9,00 €
376/100/260
Main jet, 260, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 8,50 €
376/100/270
Main jet, 270, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 8,70 €
376/100/280
Main jet, 280, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 9,00 €
376/100/290
Main jet, 290, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 9,00 €
376/100/300
Main jet, 300, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 9,00 €
376/100/310
Main jet, 310, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 9,00 €
376/100/320
Main jet, 320, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 9,00 €
376/100/330
Main jet, 330, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 9,00 €
376/100/350
Main jet, 350, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 9,00 €
376/100/90
Main jet, 90, Amal carburettor Monobloc 375, 376, 389, Concentric 626, 928, 930, 932, GP, TT
Price (VAT exc) : 9,00 €
376/139
Double banjo, 150 degree, push-on, 5/16'' tubing, for Amal Concentric 6 and 9 Series carburettors and 376, 389 Monobloc carbs
Price (VAT exc) : 8,95 €
376/410
Double banjo, 55 degree, push-on, 5/16'' tubing, for Amal Concentric 6 and 9 Series carburettors and 376, 389 Monobloc carbs
Price (VAT exc) : 8,95 €
376063
Needle, throttle slide, Amal Monobloc 376 carburettors
Price (VAT exc) : 26,90 €
389/060/35
Throttle slide, no. 3,5 for Amal Monobloc 389 series carburettor
Price (VAT exc) : 49,00 €
389/061
Throttle valve spring, Amal Monobloc carburettors, 389, 689 series
Price (VAT exc) : 7,90 €
389/063
Throttle slide needle, D, Amal 389 Monobloc carburettor
Price (VAT exc) : 24,90 €
389/066
Carburettor air intake, length 17mm, for a Amal 389 Monobloc
Price (VAT exc) : 10,80 €
4/031
Mixing chamber top ring, Amal 4, 74, 274, 5, 75, 275 carburettors
Price (VAT exc) : 23,75 €
4/032
Mixing chamber top, Amal 4, 74, 274, 5, 75, 275 carburettors
NOS
Price (VAT exc) : 25,00 €
4/035
Cable adjuster for Amal Carburettors
(for nut see 5/077)
Price (VAT exc) : 3,10 €
4/037
Throttle slide spring, short, 48mm, for Amal 76, 276 carburettors
Price (VAT exc) : 11,40 €
4/040
Fibre washer, jet block, 7/8", Amal 274
Price (VAT exc) : 1,60 €
4/042/100
Main jet, 100, Amal 4, 74, 274, 5, 75, 275, 6, 76 276, 9, 89, 289 carburettors
Price (VAT exc) : 9,50 €
4/042/130
Main jet, 130, Amal 4, 74, 274, 5, 75, 275, 6, 76 276, 9, 89, 289 carburettors
Price (VAT exc) : 10,50 €
4/042/140
Main jet, 140, Amal 4, 74, 274, 5, 75, 275, 6, 76 276, 9, 89, 289 carburettors
Price (VAT exc) : 10,50 €
4/042/150
Main jet, 150, Amal 4, 74, 274, 5, 75, 275, 6, 76 276, 9, 89, 289 carburettors
Price (VAT exc) : 10,50 €
4/042/160
Main jet, 160, Amal 4, 74, 274, 5, 75, 275, 6, 76 276, 9, 89, 289 carburettors
Price (VAT exc) : 12,50 €
4/042/190
Main jet, 190, Amal 4, 74, 274, 5, 75, 275, 6, 76 276, 9, 89, 289 carburettors
Price (VAT exc) : 11,60 €
4/046
Air valve spring, Amal pre monobloc 275, 276, 289, Monobloc 376, 389 carburettors
Price (VAT exc) : 2,40 €
4/061-107
Needle jet, 107, pre Monobloc Amal carburettors 274, 275, 276, 289
Price (VAT exc) : 16,90 €
4/063
Throttle stop screw, Amal 4, 74, 274, 5, 75, 275, 6, 76, 276 carburettors
Price (VAT exc) : 12,50 €
4/137A
Mixing chamber plug screw suitable for Amal Concentric 6 and 9 series carburettors and Monobloc 376/389 carbs
Price (VAT exc) : 2,60 €
4/148
Spring for pilot air adjusting screw, Amal 4, 74, 274, 5, 75, 275, 6, 76, 276 carburettors
Price (VAT exc) : 2,90 €
4/230
Needle clip, Amal Monobloc 375, 376, 389, 689 carburettors
Price (VAT exc) : 2,90 €
4/235
Cap retaining spring, Amal 74, 75, 76, 274, 275, 276 carburettors
Price (VAT exc) : 4,50 €
4/241
Fixing screw for cap spring for Amal Pre Monobloc and Monobloc carburettors 274, 275, 276, 289, 375, 376, 389
Price (VAT exc) : 1,50 €
5/052/4
Throttle slide, no. 4, Amal carburettor 5, 75, 275
Price (VAT exc) : 76,90 €
5/052/4U
Throttle slide, no. 4, Amal carburettor 5, 75, 275
(used - For further information or photos contact us)
Price (VAT exc) : 25,00 €
5/065
Throttle needle Amal 5, 75, 275 carburettors
Price (VAT exc) : 28,70 €
5/077
Cable adjuster lock nut for Amal Concentric 6 and 9 Series carburettors
Price (VAT exc) : 2,30 €
534/951
Brake lever, alloy, rep. Amal, 7/8" (22mm) handlebar, for cafè racer and all british and trial motorcycles such as Montesa, Ossa, Bultaco
Price (VAT exc) : 17,90 €
534/952
Clutch lever, alloy, rep. Amal, 7/8" (22mm) handlebar, for cafè racer and all british and trial motorcycles such as Montesa, Ossa, Bultaco
Price (VAT exc) : 17,90 €
6/031
Mixing chamber top ring, Amal 6, 76, 276 carburettors
Price (VAT exc) : 34,40 €
6/038
Carburettor air intake, alloy, length 17mm, for a Amal 76, 276
Price (VAT exc) : 12,50 €
6/047
Air valve guide, Amal Monobloc 376 and 76, 276 pre-monobloc carburettors
Price (VAT exc) : 7,95 €
6/065
Throttle needle, pre Monobloc Amal 276 carburettors
Price (VAT exc) : 27,50 €
6/403
Mixing chamber top, to fit 2 ferrules, Amal 6, 76, 276 carburettors
(used - For further information or photos contact us)
Price (VAT exc) : 25,00 €
600/900
Gasket set, Amal MK1 Concentric carburettor, 6 & 9 series, 620, 622, 624, 626, 627, 928, 930, 932
Made in England
Price (VAT exc) : 5,70 €
60-0423
Throttle cable, junction box to carburettor, outer length 27.5cm, inner length 34cm, for Amal Monobloc 376 & 389, Triumph T120 (1959-67), T100T (1967)
Price (VAT exc) : 13,80 €
60-0519
Cable, throttle, Doherty, about 99cm, 1964-67 Triumph twins with Amal Monobloc carburettors
Price (VAT exc) : 26,80 €
60-0745
Air control cable, bottom, outer length 27.5cm, inner length 34cm, for Amal Concentric 626 carburettors, Triumph T100 (1968 onwards)
Price (VAT exc) : 14,50 €
60-0813
Cable, throttle, outer length 96.5cm, inner length 106cm, BSA A65L, A65S, A65FS, with dual twist grip and Amal Concentric carburettors
Price (VAT exc) : 16,35 €
60-1807
Cable, air control, Amal Concentric carburettor, outer length about 93cm, inner length 105,5cm, Triumph TR6, BSA A65 Thunderbolt
Price (VAT exc) : 16,35 €
622/06025HA
Throttle slide, hard anodised forged alloy, no. 2,5 for Amal Concentric MK1 carburettor 6 series, 600, 620, 622, 624, 626, 627
Price (VAT exc) : 59,50 €
622/0602HA
Throttle slide, hard anodised forged alloy, no. 2 for Amal Concentric MK1 carburettor 6 series, 600, 620, 622, 624, 626, 627
Price (VAT exc) : 59,50 €
622/0603
Throttle slide, no. 3, Amal Concentric MK1 carburettor 6 series, 600, 620, 622, 624, 626, 627
Price (VAT exc) : 49,00 €
622/06035
Throttle slide, no. 3,5 for Amal Concentric MK1 carburettor 6 series, 600, 620, 622, 624, 626, 627
Price (VAT exc) : 44,90 €
622/06035A
Amal throttle slide, hard anodised forged alloy, no. 3,5 for Amal Concentric MK1 carburettor 6 series, 600, 620, 622, 624, 626, 627
Price (VAT exc) : 29,95 €
622/0603A
Throttle slide, hard anodised forged alloy, no. 3 for Amal Concentric MK1 carburettor 6 series, 600, 620, 622, 624, 626, 627
Price (VAT exc) : 29,95 €
622/0604HA
Throttle slide, hard anodised forged alloy, no. 4 for Amal Concentric MK1 carburettor 6 series, 600, 620, 622, 624, 626, 627
Price (VAT exc) : 59,90 €
622/062
Choke valve, slide, for Amal Concentric 6 series carburettors
Price (VAT exc) : 11,90 €
622/063
Slide needle, 2 strokes, Amal Concentric carburettor 6 series
Price (VAT exc) : 9,90 €
622/067
Needle clip, Amal Concentric 6 and 9 Series carburettors
Price (VAT exc) : 2,90 €
622/069A
Adjustable float, stay up, for Amal Concentric MK1 carburettors, 6 & 9 series
Price (VAT exc) : 11,30 €
622/071
Float spindle for Amal Concentric 6 and 9 series carburettors
Price (VAT exc) : 4,08 €
622/073
Gasket, float bowl, 6 and 9 series Amal MK1 Concentric carburettors, 620, 622, 624, 626, 627, 928, 930, 932
Price (VAT exc) : 2,95 €
622/076
Screw, pilot air adjusting, 6 and 9 series Amal MK1 Concentric carburettors, 620, 622, 624, 626, 627, 928, 930, 932
Price (VAT exc) : 3,15 €
622/077
Screw, throttle stop adjusting, 6 and 9 series Amal MK1 Concentric carburettors, 620, 622, 624, 626, 627, 928, 930, 932
Price (VAT exc) : 3,15 €
622/078
Bolt, banjo, 6 and 9 series Amal MK1 Concentric carburettors, 620, 622, 624, 626, 627, 928, 930, 932
Price (VAT exc) : 5,70 €
622/079-105
Needle jet, 2 stroke, 105, Amal MK1 and MK2 Concentric carburettor, 600, 900, 1000, 2000 series
Price (VAT exc) : 4,90 €
622/079-106
Needle jet, 2 stroke, 106, Amal MK1 and MK2 Concentric carburettor, 600, 900, 1000, 2000 series
Price (VAT exc) : 4,90 €
622/079-107
Needle jet, 2 stroke, 107, Amal MK1 and MK2 Concentric carburettor, 600, 900, 1000, 2000 series
Price (VAT exc) : 4,90 €
622/082
O ring, adjusting screw, Amal 6 and 9 Series carburettors
Price (VAT exc) : 1,50 €
622/086
Screw for float bowl and mixing chamber top, Amal Concentric carburettor 6 and 9 series
Price (VAT exc) : 2,10 €
622/101
O ring, flange sealing, Amal MK1 Concentric carburettor 620, 622, 624, 626, 627, 928, 930, 932, used also for ammeter
Price (VAT exc) : 1,90 €
622/104
Jet key tool for removal of Amal carburettor main jet
Price (VAT exc) : 11,46 €
622/122-105
Needle jet, 105, Amal MK1 Concentric carburettor, 600, 900, 1000 series
Price (VAT exc) : 11,40 €
622/122-106
Needle jet, 106, Amal MK1 Concentric carburettor, 600, 900, 1000 series
Price (VAT exc) : 11,60 €
622/122-107
Needle jet, 107, Amal MK1 Concentric carburettor, 600, 900, 1000 series
Price (VAT exc) : 11,40 €
622/122-108
Needle jet, 108, Amal MK1 Concentric carburettor, 600, 900, 1000 series
Price (VAT exc) : 11,40 €
622/122-109
Needle jet, 109, Amal MK1 Concentric carburettor, 600, 900, 1000 series
Price (VAT exc) : 11,40 €
622/124
Needle, throttle, 4 stroke, Amal 6 and 9 Series carburettors, 600, 620, 622, 624, 626, 627, 900, 928, 930, 932
Price (VAT exc) : 8,50 €
622/126
Amal carburettor throttle rod sealing rubber washer, Triumph T150
Price (VAT exc) : 0,80 €
622/129
Air valve return spring for Amal Concentric 6 and 9 series carburettors
Price (VAT exc) : 2,20 €
622/131
Spring, throttle slide, Amal Concentric MK1 carburettor, 620, 622, 624, 626, 627, 928, 930, 932
Price (VAT exc) : 2,45 €
622/134
Choke valve guide for Amal Concentric 6 series carburettors
Price (VAT exc) : 3,65 €
622/149
Float needle, aluminium, Viton tipped, Amal MK2 Concentric 2000, 2600, 2900
Price (VAT exc) : 12,90 €
622/151
Washer, drain plug, main jet, and banjo washer, Amal Monobloc and MK1 Concentric carburettors 620, 622, 624, 626, 627, 928, 930, 932
Price (VAT exc) : 2,20 €
622/155
Plug, main jet / float bowl drain, Amal MK1 Concentric carburettors 6 and 9 series
Price (VAT exc) : 5,95 €
622/155H
Plug, main jet / float bowl drain, Amal MK1 Concentric carburettors 6 and 9 series, hexagonal type
Price (VAT exc) : 10,20 €
622/172
Tickler kit for 6 and 9 series Amal Concentric carburettors, alloy
Price (VAT exc) : 5,80 €
622/197
Viton tipped float needle, 6 and 9 series Amal MK1 Concentric 620, 622, 624, 626, 627, 928, 930, 932 and Amal Monobloc 376, 389 carburettors
Price (VAT exc) : 7,80 €
622/502-17
Amal Premier Concentric carburettor pilot jet, size 17
Price (VAT exc) : 26,90 €
64/353
Plug screw, floatbowl, 1/4" x 26tpi, Amal pre monobloc 74, 274, 75, 275, 76, 276, 89, 289 carburettors
Price (VAT exc) : 5,70 €
68-4614
Air filter complete, pancake type with gauze element, central inlet, screw on, for Amal 376 and 600 serie carburettors
Made in England
Price (VAT exc) : 49,15 €
68-4614C
Air filter complete, pancake type with paper element, central inlet, screw on, for Amal 376 and 600 serie carburettors
Price (VAT exc) : 39,95 €
68-4633
Air filter, pancake type, fits Amal Monobloc 389, 689 carburettors, central inlet, scew on
Price (VAT exc) : 48,35 €
68-8702
Cable, air, ouside length about 93cm, inner length 100cm, mid adjuster in cable, Amal 389 Monobloc and Concentric 9 series carburettors, BSA A50, A65
Price (VAT exc) : 16,90 €
68-8703
Cable, air, ouside length about 82.5cm, inner length 94.5cm, mid adjuster in cable, Amal 376 Monobloc carburettors, BSA A50, A65
Price (VAT exc) : 16,90 €
68-8718/9
Competition control levers, Doherty type 200/Amal competition rep., BSA A65S Spitfire, A65F Firebird Scrambler, Royal Enfield GP5, Greeves Silverstone. Also fitted to Dunstalls, Seeleys
(pair)
Price (VAT exc) : 68,00 €
70-3985
Air filter connector hose for models fitted with Amal Monobloc 375 carburettor, Triumph 350cc, 500cc, 3TA, 5TA (1959-63)
Made in England
Price (VAT exc) : 9,50 €
82-3858
Air filter hose, originally fitted with a 376 Amal Monobloc carburettor and Vokes "D" shaped air filter, inner diameter carburettor side 38mm, pre unit Triumph
Price (VAT exc) : 19,95 €
83-1536
Air filter complete, pancake type, central inlet, screw on, for Amal Concentric 900 series, 928, 930, 932
Made in England
Price (VAT exc) : 49,90 €
83-1536C
Air filter complete, pancake type with paper element, central inlet, screw on, for Amal 900 series, 928, 930, 932
Price (VAT exc) : 41,50 €
83-1609
Air filter, offset inlet, for Amal 376, 620, 622, 624, 626, 627 carburettors
Made in England
Price (VAT exc) : 54,90 €
928/0602
Throttle slide, no. 2, Amal Concentric MK1 carburettor 9 series, 900, 928, 930, 932
Price (VAT exc) : 39,90 €
928/06025HA
Throttle slide, hard anodised forged alloy, no. 2,5 for Amal Concentric MK1 carburettor 9 series, 900, 928, 930, 932
Price (VAT exc) : 59,90 €
928/0602HA
Throttle slide, hard anodised forged alloy, no. 2 for Amal Concentric MK1 carburettor 9 series, 900, 928, 930, 932
Price (VAT exc) : 59,90 €
928/0603
Throttle slide, no. 3, Amal Concentric MK1 carburettor 9 series, 900, 928, 930, 932
Price (VAT exc) : 35,00 €
928/06035
Throttle slide no. 3,5 for Amal Concentric MK1 carburettor 9 series, 900, 928, 930, 932
Price (VAT exc) : 49,50 €
928/06035A
Throttle slide, no. 3.5, Amal Concentric MK1 carburettor 9 series, 900, 928, 930, 932, billet alloy slide with hard anodised coating for greater wear resistance and smoother operation
Price (VAT exc) : 32,50 €
928/0603A
Throttle slide, no. 3, Amal Concentric MK1 carburettor 9 series, 900, 928, 930, 932, billet alloy slide with hard anodised coating for greater wear resistance and smoother operation
Price (VAT exc) : 32,50 €
928/0603B
Throttle slide, no. 3, Amal Concentric MK1 carburettor 9 series, 900, 928, 930, 932, made from brass with superb zinc plated finish
Price (VAT exc) : 32,50 €
928/0604
Throttle slide no. 4 for Amal Concentric MK1 carburettor 9 series, 900, 928, 930, 932
Price (VAT exc) : 39,95 €
928/0604HA
Throttle slide, hard anodised forged alloy, no. 4 for Amal Concentric MK1 carburettor 9 series, 900, 928, 930, 932
Price (VAT exc) : 59,90 €
928/062
Choke valve, slide, for Amal Concentric 9 series carburettors
Price (VAT exc) : 8,20 €
928/063
Needle, throttle, 2 stroke, Amal 9 Series carburettors 900, 928, 930, 932
Price (VAT exc) : 18,90 €
928/064
Mixing chamber cap, to fit 2 adjuster, Amal Concentric 9 Series carburettors
Price (VAT exc) : 11,95 €
928/066A
Velocity stack, bellmouth, air intake, alloy, total length 17mm, for 9 series Amal Concentric carburettors, 928, 930,932
Price (VAT exc) : 8,20 €
928/076
Velocity stack, billet aluminium, total length 82mm, for 9 series Amal Concentric carburettors, 928, 930, 932
Made in England
Price (VAT exc) : 41,90 €
928/097
Mixing chamber cap, to fit 1 adjuster and 1 ferrule, Amal Concentric 9 Series carburettors
Price (VAT exc) : 11,95 €
928/098
Mixing chamber cap, to fit 2 fellules (no adjuster), Amal Concentric 9 Series carburettors
Price (VAT exc) : 13,95 €
928/103
Choke valve guide for Amal Concentric 9 series carburettors
Price (VAT exc) : 2,95 €
99-1102
Twist grip, throttle, Amal 364, for 7/8" handlebar, BSA, Triumph, Norton
Price (VAT exc) : 22,90 €
BR 0010AM
Handlegrip, Amal, about 150mm x 33mm diameter
Price (VAT exc) : 10,90 €
BR 019001
Manifold adaptor, alloy, swop your Amal GP over for a MK1 or Monobloc
Price (VAT exc) : 120,00 €
BR 038901
Throttle cable, outer length 92cm, inner 103.5cm, for Amal Monobloc 389 carburettors and no. 313/364 twistgrips
Price (VAT exc) : 17,50 €
BR 1932AM
Finned alloy manifold, 32mm and 1" thick, John Tickle type. 2" stud centres suitable for standard Amal concentric and monobloc carburettor. Finned alloy construction improves heat disipation. Ideal for Cafe Racer and Triton applications
Price (VAT exc) : 42,90 €
BR 276
Carburettor, Amal 276 Pre Monobloc, BSA M20, M21, A7, A10, B30, B31, B32, Norton 16H, Model 50, Nomad, Matchless G3L, Ariel VG, NH, VB, KG, Red Hunter, Royal Enfield, Triumph 5T Speedtwin, Tiger 100, Thunderbird 6T, Sunbeam
Price (VAT exc) : 555,00 €
BR 366012B
Grips, handlebar, 7/8", Amal rep., black, Triumph (Pair)
Price (VAT exc) : 16,35 €
BR 366012B-1
Grips, handlebar, diameter 1" + 1-1/8", Amal rep., black, Triumph (Pair)
Price (VAT exc) : 16,35 €
BR 366012G
Grips, handlebar, 7/8", Amal rep., grey, Triumph (Pair)
Price (VAT exc) : 16,35 €
BR 366012G-1
Grips, handlebar, diameter 1" + 1-1/8", Amal rep., grey, Triumph (Pair)
Price (VAT exc) : 16,35 €
BR 366012W
Grips, handlebar, diameter 7/8" + 1", Amal rep., white, Triumph, ideal for Cafè racer and custom applications (Pair)
Price (VAT exc) : 13,90 €
BR 366012W-1
Grips, handlebar, diameter 1" + 1-1/8", Amal rep., white, Triumph, ideal for Cafè racer and custom applications (Pair)
Price (VAT exc) : 12,25 €
BR 428A
Velocity stack, Amal, billet aluminium, total length 82mm, for 9 series Amal Concentric MK1carburettors, 928, 930,932
Price (VAT exc) : 90,00 €
BR 900S
Air intake, short ram pipe, alloy, with gauze, total length 39mm, Amal Concentric MKI carburettors 900, 928, 930, 932 series
Price (VAT exc) : 62,90 €
BR 90622
Air filter, conical type, 42mm, with clamp, universal, fits on Amal 376 and 600 series carburettors
Price (VAT exc) : 13,50 €
BR 90623
Air filter, conical type, 48mm, with clamp, universal, fits on Amal 389 and 900 series carburettors
Price (VAT exc) : 13,50 €
BR 90901
Air intake, bellmouth, alloy, with gauze, total length 61mm, Amal Monobloc 376 and Concentric carburettors 600, 620, 622, 624, 626, 627 series
Price (VAT exc) : 25,50 €
BR A2-3/M-3
Air intake, bellmouth, alloy, with gauze, total length 61mm, Amal Monobloc 389
Price (VAT exc) : 29,00 €
BR A2-4B
Air intake, bellmouth, alloy, with gauze, about 21mm long, Amal Monobloc 376 and Concentric carburettors 600, 620, 622, 624, 626, 627 series
Price (VAT exc) : 39,50 €
BR A2-5/M-3
Air intake, bellmouth, alloy, with gauze, total length 61mm, for 9 series Amal Concentric carburettors, 928, 930, 932
Made in England
Price (VAT exc) : 29,90 €
BR AM/376
Air intake, alloy, total length 63mm, for Amal Monobloc 376 and Concentric 600, 620, 622, 624, 626, 627 series
Price (VAT exc) : 39,50 €
BR L626/2S
Carburettor, left hand, 26mm, Premier Amal Concentric MK1 626, 2 stroke
Price (VAT exc) : 279,00 €
BR L626/301
Carburettor, left hand, 26mm, Premier Amal Concentric MK1 626, BSA, Triumph
Price (VAT exc) : 268,00 €
BR L930/301
Carburettor, left hand, 30mm, Premier Amal Concentric MK1 930, BSA, Triumph, Norton, Royal Enfield, AJS & Matchless, Velocette
Price (VAT exc) : 279,50 €
BR L932/301
Carburettor, left hand, 32mm, Premier Amal Concentric MK1 932, BSA A65 Spitfire, B50MX, Norton Commando 750 Combat, 850
Price (VAT exc) : 278,00 €
BR LKRGAM
Air intake locking ring, internal diameter about 43,2mm, Amal
Price (VAT exc) : 30,00 €
BR R626/2S
Carburettor, right hand, 26mm, Premier Amal Concentric MK1 626, 2 stroke
Price (VAT exc) : 279,00 €
BR R626/300
Carburettor, right hand, 26mm, Premier Amal Concentric MK1 626, BSA, Triumph
Price (VAT exc) : 268,00 €
BR R928/300
Carburettor, right hand, 28mm, Premier Amal Concentric MK1 928, BSA A65T Thunderbolt, C25 Barracuda, B25 Starfire, B25SS Gold Star, B25T Victor, Triumph TR25W Trophy, TR25SS Trailblazer
Price (VAT exc) : 278,00 €
BR R930/300
Carburettor, right hand, 30mm, Premier Amal Concentric MK1 930, BSA, Triumph, Norton, Royal Enfield, AJS & Matchless, Velocette
Price (VAT exc) : 279,50 €
BR R932/300
Carburettor, right hand, 32mm, Premier Amal Concentric MK1 932, BSA A65 Spitfire, B50MX, Norton Commando 750 Combat, 850
Price (VAT exc) : 278,00 €
BR RHG117
Handlebar grips, 1" bar, 1940-50s style, 5", Amal rep. (Pair)
Price (VAT exc) : 15,60 €
BR RHG617
Handlebar grips, 7/8" bar, 1940-50s style, 5", Amal rep., BSA, AJS, Matchless, Vincent, Triumph, Norton, Velocette and many other (Pair)
Price (VAT exc) : 15,60 €
BR SET626-3
Triple carburettor set, Amal Concentric 626, for BSA A75 Rocket 3 and Triumph Trident T150, T160
Price (VAT exc) : 810,00 €
RKC/515U
Tickler kit, pin, body and spring, Amal Monobloc 375, 376, 389
(used - For further information or photos contact us)
Price (VAT exc) : 7,00 €
RKC/525
Float kit, bottom feed, type 14, float (40.9 x 35.5mm), needle and clip, for Amal pre monobloc carburettors, 4, 74, 274, 5, 75, 275, 6, 76, 276, 89, 289
Price (VAT exc) : 65,00 €
RKC/614
Choke kit, air valve, spring and guide, for Amal 276 pre monobloc carburettor
Price (VAT exc) : 39,00 €
RKC/615
Choke kit, air valve, spring and guide, for Amal 289 pre monobloc carburettor
Price (VAT exc) : 39,00 €